Physical Memory Protection (PMP)
The CV32E40S includes the Physical Memory Protection (PMP) unit.
The PMP is both statically and dynamically configurable. The static configuration is performed through the top level
PMP_GRANULARITY. The dynamic configuration is performed through the CSRs described in Control and Status Registers.
PMP_GRANULARITY parameter is used to configure the minimum granularity of PMP address matching. The minimum granularity is 2 PMP_NUM_REGIONS+2 bytes, so at least 4 bytes.
PMP_NUM_REGIONS parameter is used to configure the number of PMP regions, starting from the lowest numbered region. All PMP CSRs are always implemented, but CSRs (or bitfields of CSRs) related to PMP entries with number
PMP_NUM_REGIONS and above are hardwired to zero.
The reset value of the PMP CSR registers can be set through the top level parameters
PMP_PMPNCFG_RV is an array of
PMP_NUM_REGIONS entries of the type
pmpncfg_t. Entry N determines the reset value of the
pmpNcfg bitfield in the
PMP_PMPADDR_RV is an array of
PMP_NUM_REGIONS entries of
logic [31:0]. Entry N determines the reset value of the
PMP_MSECCFG_RV is of the type
mseccfg_t and determines the reset value of the