CORE-V Instruction Set Extensions

CV32E40P supports the following CORE-V ISA Extensions, which are part of Xcorev and can be enabled by setting PULP_XPULP == 1.

Additionally the event load instruction (cv.elw) is supported by setting PULP_CLUSTER == 1.

To use such instructions, you need to compile your SW with the CORE-V GCC compiler.

If not specified, all the operands are signed and immediate values are sign-extended.

Post-Incrementing Load & Store Instructions and Register-Register Load & Store Instructions

Post-Incrementing load and store instructions perform a load, or a store, respectively, while at the same time incrementing the address that was used for the memory access. Since it is a post-incrementing scheme, the base address is used for the access and the modified address is written back to the register-file. There are versions of those instructions that use immediates and those that use registers as offsets. The base address always comes from a register.

The custom post-incrementing load & store instructions and register-register load & store instructions are only supported if PULP_XPULP == 1.

Load Operations

Mnemonic

Description

Register-Immediate Loads with Post-Increment

cv.lb rD, Imm(rs1!)

rD = Sext(Mem8(rs1))

rs1 += Imm[11:0]

cv.lbu rD, Imm(rs1!)

rD = Zext(Mem8(rs1))

rs1 += Imm[11:0]

cv.lh rD, Imm(rs1!)

rD = Sext(Mem16(rs1))

rs1 += Imm[11:0]

cv.lhu rD, Imm(rs1!)

rD = Zext(Mem16(rs1))

rs1 += Imm[11:0]

cv.lw rD, Imm(rs1!)

rD = Mem32(rs1)

rs1 += Imm[11:0]

Register-Register Loads with Post-Increment

cv.lb rD, rs2(rs1!)

rD = Sext(Mem8(rs1))

rs1 += rs2

cv.lbu rD, rs2(rs1!)

rD = Zext(Mem8(rs1))

rs1 += rs2

cv.lh rD, rs2(rs1!)

rD = Sext(Mem16(rs1))

rs1 += rs2

cv.lhu rD, rs2(rs1!)

rD = Zext(Mem16(rs1))

rs1 += rs2

cv.lw rD, rs2(rs1!)

rD = Mem32(rs1)

rs1 += rs2

Register-Register Loads

cv.lb rD, rs2(rs1)

rD = Sext(Mem8(rs1 + rs2))

cv.lbu rD, rs2(rs1)

rD = Zext(Mem8(rs1 + rs2))

cv.lh rD, rs2(rs1)

rD = Sext(Mem16(rs1 + rs2))

cv.lhu rD, rs2(rs1)

rD = Zext(Mem16(rs1 + rs2))

cv.lw rD, rs2(rs1)

rD = Mem32(rs1 + rs2)

Store Operations

Mnemonic

Description

Register-Immediate Stores with Post-Increment

cv.sb rs2, Imm(rs1!)

Mem8(rs1) = rs2

rs1 += Imm[11:0]

cv.sh rs2, Imm(rs1!)

Mem16(rs1) = rs2

rs1 += Imm[11:0]

cv.sw rs2, Imm(rs1!)

Mem32(rs1) = rs2

rs1 += Imm[11:0]

Register-Register Stores with Post-Increment

cv.sb rs2, rs3(rs1!)

Mem8(rs1) = rs2

rs1 += rs3

cv.sh rs2, rs3(rs1!)

Mem16(rs1) = rs2

rs1 += rs3

cv.sw rs2, rs3(rs1!)

Mem32(rs1) = rs2

rs1 += rs3

Register-Register Stores

cv.sb rs2, rs3(rs1)

Mem8(rs1 + rs3) = rs2

cv.sh rs2 rs3(rs1)

Mem16(rs1 + rs3) = rs2

cv.sw rs2, rs3(rs1)

Mem32(rs1 + rs3) = rs2

Encoding

31 : 20

19 :15

14 : 12

11 :07

06 : 00

imm[11:0]

rs1

funct3

rd

opcode

Mnemonic

offset

base

000

dest

000 1011

cv.lb rD, Imm(rs1!)

offset

base

100

dest

000 1011

cv.lbu rD, Imm(rs1!)

offset

base

001

dest

000 1011

cv.lh rD, Imm(rs1!)

offset

base

101

dest

000 1011

cv.lhu rD, Imm(rs1!)

offset

base

010

dest

000 1011

cv.lw rD, Imm(rs1!)

31 : 25

24 : 20

19 :15

14 : 12

11 :07

06 : 00

funct7

rs2

rs1

funct3

rd

opcode

Mnemonic

000 0000

offset

base

111

dest

000 1011

cv.lb rD, rs2(rs1!)

010 0000

offset

base

111

dest

000 1011

cv.lbu rD, rs2(rs1!)

000 1000

offset

base

111

dest

000 1011

cv.lh rD, rs2(rs1!)

010 1000

offset

base

111

dest

000 1011

cv.lhu rD, rs2(rs1!)

001 0000

offset

base

111

dest

000 1011

cv.lw rD, rs2(rs1!)

31 : 25

24 : 20

19 :15

14 : 12

11 :07

06 : 00

funct7

rs2

rs1

funct3

rd

opcode

Mnemonic

000 0000

offset

base

111

dest

000 0011

cv.lb rD, rs2(rs1)

010 0000

offset

base

111

dest

000 0011

cv.lbu rD, rs2(rs1)

000 1000

offset

base

111

dest

000 0011

cv.lh rD, rs2(rs1)

010 1000

offset

base

111

dest

000 0011

cv.lhu rD, rs2(rs1)

001 0000

offset

base

111

dest

000 0011

cv.lw rD, rs2(rs1)

31 : 25

24:20

19 :15

14 : 12

11 : 07

06 : 00

imm[11:5]

rs2

rs1

funct3

rd

opcode

Mnemonic

offset[11:5]

src

base

000

offset[4:0]

010 1011

cv.sb rs2, Imm(rs1!)

offset[11:5]

src

base

001

offset[4:0]

010 1011

cv.sh rs2, Imm(rs1!)

offset[11:5]

src

base

010

offset[4:0]

010 1011

cv.sw rs2, Imm(rs1!)

31 : 25

24 : 20

19 :15

14 : 12

11 :07

06 : 00

funct7

rs2

rs1

funct3

rd

opcode

Mnemonic

000 0000

src

base

100

offset

010 1011

cv.sb rs2, rs3(rs1!)

000 0000

src

base

101

offset

010 1011

cv.sh rs2, rs3(rs1!)

000 0000

src

base

110

offset

010 1011

cv.sw rs2, rs3(rs1!)

31 : 25

24 : 20

19 :15

14 : 12

11 :07

06 : 00

funct7

rs2

rs1

funct3

rs3

opcode

Mnemonic

000 0000

src

base

100

offset

010 0011

cv.sb rs2, rs3(rs1)

000 0000

src

base

101

offset

010 0011

cv.sh rs2, rs3(rs1)

000 0000

src

base

110

offset

010 0011

cv.sw rs2, rs3(rs1)

Event Load Instructions

The event load instruction cv.elw is only supported if the PULP_CLUSTER parameter is set to 1. The event load performs a load word and can cause the CV32E40P to enter a sleep state as explained in PULP Cluster Extension.

Load Operations

Mnemonic

Description

Event Load

cv.elw rD, Imm(rs1)

rD = Mem32(Sext(Imm)+rs1)

Encoding

31 : 20

19 :15

14 : 12

11 :07

06 : 00

imm[11:0]

rs1

funct3

rd

opcode

Mnemonic

offset

base

110

dest

000 0011

cv.elw rD, Imm(rs1)

Hardware Loops

CV32E40P supports 2 levels of nested hardware loops. The loop has to be setup before entering the loop body. For this purpose, there are two methods, either the long commands that separately set start- and end-addresses of the loop and the number of iterations, or the short command that does all of this in a single instruction. The short command has a limited range for the number of instructions contained in the loop and the loop must start in the next instruction after the setup instruction.

Hardware loop instructions and related CSRs are only supported if PULP_XPULP == 1.

Details about the hardware loop constraints are provided in CORE-V Hardware Loop Extensions.

In the following tables, the hardware loop instructions are reported. In assembly, L is referred by x0 or x1.

Operations

Long Hardware Loop Setup instructions

Mnemonic

Description

cv.starti

L, uimmL

lpstart[L] = PC + (uimmL << 1)

cv.endi

L, uimmL

lpend[L] = PC + (uimmL << 1)

cv.count

L, rs1

lpcount[L] = rs1

cv.counti

L, uimmL

lpcount[L] = uimmL

Short Hardware Loop Setup Instructions

Mnemonic

Description

cv.setup

L, rs1, uimmL

lpstart[L] = pc + 4

lpend[L] = pc + (uimmL << 1)

lpcount[L] = rs1

cv.setupi

L, uimmL, uimmS

lpstart[L] = pc + 4

lpend[L] = pc + (uimmS << 1)

lpcount[L] = uimmL

Encoding

31 : 20

19 :15

14 : 12

11 :08

07

06 : 00

uimmL[11:0]

rs1

funct3

rd

L

opcode

Mnemonic

uimmL[11:0]

00000

000

0000

L

111 1011

cv.starti L, uimmL

uimmL[11:0]

00000

001

0000

L

111 1011

cv.endi L, uimmL

0000 0000 0000

src1

010

0000

L

111 1011

cv.count L, rs1

uimmL[11:0]

00000

011

0000

L

111 1011

cv.counti L, uimmL

uimmL[11:0]

src1

100

0000

L

111 1011

cv.setup L, rs1, uimmL

uimmL[11:0]

uimmS[4:0]

101

0000

L

111 1011

cv.setupi L, uimmL, uimmS

ALU

CV32E40P supports advanced ALU operations that allow to perform multiple instructions that are specified in the base instruction set in one single instruction and thus increases efficiency of the core. For example, those instructions include zero-/sign-extension instructions for 8-bit and 16-bit operands, simple bit manipulation/counting instructions and min/max/avg instructions. The ALU does also support saturating, clipping, and normalizing instructions which make fixed-point arithmetic more efficient.

The custom ALU extensions are only supported if PULP_XPULP == 1.

Bit manipulation is not supported by the compiler tool chain.

The custom extensions to the ALU are split into several subgroups that belong together.

  • Bit manipulation instructions are useful to work on single bits or groups of bits within a word, see Bit Manipulation Operations.

  • General ALU instructions try to fuse common used sequences into a single instruction and thus increase the performance of small kernels that use those sequence, see General ALU Operations.

  • Immediate branching instructions are useful to compare a register with an immediate value before taking or not a branch, see see Immediate Branching Operations.

Extract, Insert, Clear and Set instructions have the following meaning:

  • Extract Is3+1 or rs2[9:5]+1 bits from position Is2 or rs2[4:0] [and sign extend it]

  • Insert Is3+1 or rs2[9:5]+1 bits at position Is2 or rs2[4:0]

  • Clear Is3+1 or rs2[9:5]+1 bits at position Is2 or rs2[4:0]

  • Set Is3+1 or rs2[9:5]+1 bits at position Is2 or rs2[4:0]

Bit Reverse Instruction

This section will describe the cv.bitrev instruction from a bit manipulation perspective without describing it’s application as part of an FFT. The bit reverse instruction will reverse bits in groupings of 1, 2 or 3 bits. The number of grouped bits is described by Is3 as follows:

  • 0 - reverse single bits

  • 1 - reverse groups of 2 bits

  • 2 - reverse groups of 3 bits

The number of bits that are reversed can be controlled by Is2. This will specify the number of bits that will be removed by a left shift prior to the reverse operation resulting in the 32-Is2 least significant bits of the input value being reversed and the Is2 most significant bits of the input value being thrown out.

What follows is a few examples.

cv.bitrev x18, x20, 0, 4 (groups of 1 bit; radix-2)

in:    0xC64A5933 11000110010010100101100100110011
shift: 0x64A59330 01100100101001011001001100110000
out:   0x0CC9A526 00001100110010011010010100100110

Swap pattern:
A B C D E F G H . . . . . . . . . . . . . . . . . . . . . . . .
0 1 1 0 0 1 0 0 1 0 1 0 0 1 0 1 1 0 0 1 0 0 1 1 0 0 1 1 0 0 0 0
. . . . . . . . . . . . . . . . . . . . . . . . H G F E D C B A
0 0 0 0 1 1 0 0 1 1 0 0 1 0 0 1 1 0 1 0 0 1 0 1 0 0 1 0 0 1 1 0

In this example the input value is first shifted by 4 (Is2). Each individual bit is reversed. For example, bits 31 and 0 are swapped, 30 and 1, etc.

cv.bitrev x18, x20, 1, 4 (groups of 2 bits; radix-4)

in:    0xC64A5933 11000110010010100101100100110011
shift: 0x64A59330 01100100101001011001001100110000
out:   0x0CC65A19 00001100110001100101101000011001

Swap pattern:
A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P
01 10 01 00 10 10 01 01 10 01 00 11 00 11 00 00
P  O  N  M  L  K  J  I  H  G  F  E  D  C  B  A
00 00 11 00 11 00 01 10 01 01 10 10 00 01 10 01

In this example the input value is first shifted by 4 (Is2). Each group of two bits are reversed. For example, bits 31 and 30 are swapped with 1 and 0 (retaining their position relative to each other), bits 29 and 28 are swapped with 3 and 2, etc.

cv.bitrev x18, x20, 2, 4 (groups of 3 bits; radix-8)

in:    0xC64A5933 11000110010010100101100100110011
shift: 0x64A59330 01100100101001011001001100110000
out:   0x216B244B 00100001011010110010010001001011

Swap pattern:
A   B   C   D   E   F   G   H   I   J
011 001 001 010 010 110 010 011 001 100 00
   J   I   H   G   F   E   D   C   B   A
00 100 001 011 010 110 010 010 001 001 011

In this last example the input value is first shifted by 4 (Is2). Each group of three bits are reversed. For example, bits 31, 30 and 29 are swapped with 4, 3 and 2 (retaining their position relative to each other), bits 28, 27 and 26 are swapped with 7, 6 and 5, etc. Notice in this example that bits 0 and 1 are lost and the result is shifted right by two with bits 31 and 30 being tied to zero. Also notice that when J (100) is swapped with A (011), the four most significant bits are no longer zero as in the other cases. This may not be desirable if the intention is to pack a specific number of grouped bits aligned to the least significant bit and zero extended into the result. In this case care should be taken to set Is2 appropriately.

Bit Manipulation Operations

Mnemonic

Description

cv.extract

rD, rs1, Is3, Is2

rD = Sext(rs1[min(Is3+Is2,31):Is2])

cv.extractu

rD, rs1, Is3, Is2

rD = Zext(rs1[min(Is3+Is2,31):Is2])

cv.extractr

rD, rs1, rs2

rD = Sext(rs1[min(rs2[9:5]+rs2[4:0],31):rs2[4:0]])

cv.extractur

rD, rs1, rs2

rD = Zext(rs1[min(rs2[9:5]+rs2[4:0],31):rs2[4:0]])

cv.insert

rD, rs1, Is3, Is2

rD[min(Is3+Is2,31):Is2] = rs1[Is3:max(Is3+Is2,31)-31] the rest of the bits of rD are passed through and are not modified

cv.insertr

rD, rs1, rs2

rD[min(rs2[9:5]+rs2[4:0],31):rs2[4:0]] = rs1[rs2[9:5]:max(rs2[9:5]+rs2[4:0],31)-31] the rest of the bits of rD are passed through and are not modified

cv.bclr

rD, rs1, Is3, Is2

rD = (rs1 & ~(((1<<Is3)-1)<<Is2))

cv.bclrr

rD, rs1, rs2

rD = (rs1 & ~(((1<<rs2[9:5])-1)<<rs2[4:0]))

cv.bset

rD, rs1, Is3, Is2

rD = (rs1 | (((1<<Is3)-1)<<Is2))

cv.bsetr

rD, rs1, rs2

rD = (rs1 | (((1<<rs2[9:5])-1)<<rs2[4:0]))

cv.ff1

rD, rs1

rD = bit position of the first bit set in rs1, starting from LSB. If bit 0 is set, rD will be 0. If only bit 31 is set, rD will be 31. If rs1 is 0, rD will be 32.

cv.fl1

rD, rs1

rD = bit position of the last bit set in rs1, starting from MSB. If bit 31 is set, rD will be 31. If only bit 0 is set, rD will be 0. If rs1 is 0, rD will be 32.

cv.clb

rD, rs1

rD = count leading bits of rs1 Note: This is the number of consecutive 1’s or 0’s from MSB. Note: If rs1 is 0, rD will be 0.

cv.cnt

rD, rs1

rD = Population count of rs1, i.e. number of bits set in rs1

cv.ror

rD, rs1, rs2

rD = RotateRight(rs1, rs2)

cv.bitrev

rD, rs1, Is3, Is2

Given an input rs1 it returns a bit reversed representation assuming

FFT on 2^Is2 points in Radix 2^(Is3+1)

Note: Is3 can be either 0 (radix-2), 1 (radix-4) or 2 (radix-8)

Note: Sign extension is done over the extracted bit, i.e. the Is2-th bit.

Bit Manipulation Encoding

31:30

29 : 25

24 : 20

19 :15

14 : 12

11 :07

06 : 00

f2

ls3[4:0]

ls2[4:0]

rs1

funct3

rd

opcode

Mnemonic

11

Luimm5[4:0]

Iuimm5[4:0]

src

000

dest

011 0011

cv.extract rD, rs1, Is3, Is2

11

Luimm5[4:0]

Iuimm5[4:0]

src

001

dest

011 0011

cv.extractu rD, rs1, Is3, Is2

11

Luimm5[4:0]

Iuimm5[4:0]

src

010

dest

011 0011

cv.insert rD, rs1, Is3, Is2

11

Luimm5[4:0]

Iuimm5[4:0]

src

011

dest

011 0011

cv.bclr rD, rs1, Is3, Is2

11

Luimm5[4:0]

Iuimm5[4:0]

src

100

dest

011 0011

cv.bset rD, rs1, Is3, Is2

10

5’b0_0000

src2

src1

000

dest

011 0011

cv.extractr rD, rs1, rs2

10

5’b0_0000

src2

src1

001

dest

011 0011

cv.extractur rD, rs1, rs2

10

5’b0_0000

src2

src1

010

dest

011 0011

cv.insertr rD, rs1, rs2

10

5’b0_0000

src2

src1

011

dest

011 0011

cv.bclrr rD, rs1, rs2

10

5’b0_0000

src2

scr1

100

dest

011 0011

cv.bsetr rD, rs1, rs2

11

{3’bXXX,Luimm2[1:0]}

Iuimm5[4:0]

src

101

dest

011 0011

cv.bitrev rD, rs1, Is3, Is2

31 : 25

24 : 20

19 :15

14 : 12

11 : 7

6 : 0

funct7

rs2

rs1

funct3

rD

opcode

000 0100

src2

src1

101

dest

011 0011

cv.ror rD, rs1, rs2

000 1000

00000

src1

000

dest

011 0011

cv.ff1 rD, rs1

000 1000

00000

src1

001

dest

011 0011

cv.fl1 rD, rs1

000 1000

00000

src1

010

dest

011 0011

cv.clb rD, rs1

000 1000

00000

src1

011

dest

011 0011

cv.cnt rD, rs1

General ALU Operations

Mnemonic

Description

cv.abs

rD, rs1

rD = rs1 < 0 ? –rs1 : rs1

cv.slet

rD, rs1, rs2

rD = rs1 <= rs2 ? 1 : 0 Note: Comparison is signed

cv.sletu

rD, rs1, rs2

rD = rs1 <= rs2 ? 1 : 0 Note: Comparison is unsigned

cv.min

rD, rs1, rs2

rD = rs1 < rs2 ? rs1 : rs2 Note: Comparison is signed

cv.minu

rD, rs1, rs2

rD = rs1 < rs2 ? rs1 : rs2 Note: Comparison is unsigned

cv.max

rD, rs1, rs2

rD = rs1 < rs2 ? rs2 : rs1 Note: Comparison is signed

cv.maxu

rD, rs1, rs2

rD = rs1 < rs2 ? rs2 : rs1 Note: Comparison is unsigned

cv.exths

rD, rs1

rD = Sext(rs1[15:0])

cv.exthz

rD, rs1

rD = Zext(rs1[15:0])

cv.extbs

rD, rs1

rD = Sext(rs1[7:0])

cv.extbz

rD, rs1

rD = Zext(rs1[7:0])

cv.clip

rD, rs1, Is2

if rs1 <= -2^(Is2-1), rD = -2^(Is2-1),

else if rs1 >= 2^(Is2-1)–1, rD = 2^(Is2-1)-1,

else rD = rs1

Note: If ls2 is equal to 0, -2^(Is2-1)= -1 while (2^(Is2-1)-1)=0;

cv.clipr

rD, rs1, rs2

if rs1 <= -(rs2+1), rD = -(rs2+1),

else if rs1 >=rs2, rD = rs2,

else rD = rs1

cv.clipu

rD, rs1, Is2

if rs1 <= 0, rD = 0,

else if rs1 >= 2^(Is2–1)-1, rD = 2^(Is2-1)-1,

else rD = rs1

Note: If ls2 is equal to 0, (2^(Is2-1)-1)=0;

cv.clipur

rD, rs1, rs2

if rs1 <= 0, rD = 0,

else if rs1 >= rs2, rD = rs2,

else rD = rs1

cv.addN

rD, rs1, rs2, Is3

rD = (rs1 + rs2) >>> Is3 Note: Arithmetic shift right. Setting Is3 to 2 replaces former p.avg

cv.adduN

rD, rs1, rs2, Is3

rD = (rs1 + rs2) >> Is3 Note: Logical shift right. Setting Is3 to 2 replaces former p.avg

cv.addRN

rD, rs1, rs2, Is3

rD = (rs1 + rs2 + 2^(Is3-1)) >>> Is3 Note: Arithmetic shift right.

cv.adduRN

rD, rs1, rs2, Is3

rD = (rs1 + rs2 + 2^(Is3-1))) >> Is3 Note: Logical shift right.

cv.addNr

rD, rs1, rs2

rD = (rD + rs1) >>> rs2[4:0] Note: Arithmetic shift right.

cv.adduNr

rD, rs1, rs2

rD = (rD + rs1) >> rs2[4:0] Note: Logical shift right.

cv.addRNr

rD, rs1, rs2

rD = (rD + rs1 + 2^(rs2[4:0]-1)) >>> rs2[4:0] Note: Arithmetic shift right.

cv.adduRNr

rD, rs1, rs2

rD = (rD + rs1 + 2^(rs2[4:0]-1))) >> rs2[4:0] Note: Logical shift right.

cv.subN

rD, rs1, rs2, Is3

rD = (rs1 - rs2) >>> Is3 Note: Arithmetic shift right.

cv.subuN

rD, rs1, rs2, Is3

rD = (rs1 - rs2) >> Is3 Note: Logical shift right.

cv.subRN

rD, rs1, rs2, Is3

rD = (rs1 - rs2 + 2^(Is3-1)) >>> Is3 Note: Arithmetic shift right.

cv.subuRN

rD, rs1, rs2, Is3

rD = (rs1 - rs2 + 2^(Is3-1))) >> Is3 Note: Logical shift right.

cv.subNr

rD, rs1, rs2

rD = (rD – rs1) >>> rs2[4:0] Note: Arithmetic shift right.

cv.subuNr

rD, rs1, rs2

rD = (rD – rs1) >> rs2[4:0] Note: Logical shift right.

cv.subRNr

rD, rs1, rs2

rD = (rD – rs1+ 2^(rs2[4:0]-1)) >>> rs2[4:0] Note: Arithmetic shift right.

cv.subuRNr

rD, rs1, rs2

rD = (rD – rs1+ 2^(rs2[4:0]-1))) >> rs2[4:0] Note: Logical shift right.

General ALU Encoding

31 : 25

24 : 20

19 :15

14 : 12

11 : 7

6 : 0

funct7

rs2

rs1

funct

rD

opcode

000 0010

00000

src1

000

dest

011 0011

cv.abs rD, rs1

000 0010

src2

src1

010

dest

011 0011

cv.slet rD, rs1, rs2

000 0010

src2

src1

011

dest

011 0011

cv.sletu rD, rs1, rs2

000 0010

src2

src1

100

dest

011 0011

cv.min rD, rs1, rs2

000 0010

src2

src1

101

dest

011 0011

cv.minu rD, rs1, rs2

000 0010

src2

src1

110

dest

011 0011

cv.max rD, rs1, rs2

000 0010

src2

src1

111

dest

011 0011

cv.maxu rD, rs1, rs2

000 1000

00000

src1

100

dest

011 0011

cv.exths rD, rs1

000 1000

00000

src1

101

dest

011 0011

cv.exthz rD, rs1

000 1000

00000

src1

110

dest

011 0011

cv.extbs rD, rs1

000 1000

00000

src1

111

dest

011 0011

cv.extbz rD, rs1

31 : 25

24 : 20

19 :15

14 : 12

11 : 7

6 : 0

funct7

Is2[4:0]

rs1

funct3

rD

opcode

000 1010

Iuimm5[4:0]

src1

001

dest

011 0011

cv.clip rD, rs1, Is2

000 1010

Iuimm5[4:0]

src1

010

dest

011 0011

cv.clipu rD, rs1, Is2

000 1010

src2

src1

101

dest

011 0011

cv.clipr rD, rs1, rs2

000 1010

src2

src1

110

dest

011 0011

cv.clipur rD, rs1, rs2

31:30

29 : 25

24 :20

19 :15

14 : 12

11 : 7

6 : 0

f2

Is3[4:0]

rs2

rs1

funct3

rD

opcode

00

Luimm5[4:0]

src2

src1

010

dest

101 1011

cv.addN rD, rs1, rs2, Is3

10

Luimm5[4:0]

src2

src1

010

dest

101 1011

cv.adduN rD, rs1, rs2, Is3

00

Luimm5[4:0]

src2

src1

110

dest

101 1011

cv.addRN rD, rs1, rs2, Is3

10

Luimm5[4:0]

src2

src1

110

dest

101 1011

cv.adduRN rD, rs1, rs2, Is3

00

Luimm5[4:0]

src2

src1

011

dest

101 1011

cv.subN rD, rs1, rs2, Is3

10

Luimm5[4:0]

src2

src1

011

dest

101 1011

cv.subuN rD, rs1, rs2, Is3

00

Luimm5[4:0]

src2

src1

111

dest

101 1011

cv.subRN rD, rs1, rs2, Is3

10

Luimm5[4:0]

src2

src1

111

dest

101 1011

cv.subuRN rD, rs1, rs2, Is3

01

Luimm5[4:0]

src2

src1

010

dest

101 1011

cv.addNr rD, rs1, rs2

11

00000

src2

src1

010

dest

101 1011

cv.adduNr rD, rs1, rs

01

00000

src2

src1

110

dest

101 1011

cv.addRNr rD, rs1, rs

11

00000

src2

src1

110

dest

101 1011

cv.adduRNr rD, rs1, rs2

01

00000

src2

src1

011

dest

101 1011

cv.subNr rD, rs1, rs2

11

00000

src2

src1

011

dest

101 1011

cv.subuNr rD, rs1, rs2

01

00000

src2

src1

111

dest

101 1011

cv.subRNr rD, rs1, rs2

11

00000

src2

src1

111

dest

101 1011

cv.subuRNr rD, rs1, rs2

Immediate Branching Operations

Mnemonic

Description

cv.beqimm rs1, Imm5, Imm12

Branch to PC + (Imm12 << 1) if rs1 is equal to Imm5. Imm5 is signed.

cv.bneimm rs1, Imm5, Imm12

Branch to PC + (Imm12 << 1) if rs1 is not equal to Imm5. Imm5 is signed.

Immediate Branching Encoding

31

30 : 25

24 : 20

19 : 15

14 : 12

11 : 8

7

6 : 0

Imm12[12]

Imm12[10:5]

rs2

rs1

funct3

Imm12

Imm12

opcode

Imm12[12]

Imm12[10:5]

Imm5

src1

010

Imm12[4:1]

Imm12[11]

110 0011

cv.beqimm rs1, Imm5, Imm12

Imm12[12]

Imm12[10:5]

Imm5

src1

011

Imm12[4:1]

Imm12[11]

110 0011

cv.bneimm rs1, Imm5, Imm12

Multiply-Accumulate

CV32E40P supports custom extensions for multiply-accumulate and half-word multiplications with an optional post-multiplication shift.

The custom multiply-accumulate extensions are only supported if PULP_XPULP == 1.

MAC Operations

32-Bit x 32-Bit Multiplication Operations

Mnemonic

Description

cv.mac

rD, rs1, rs2

rD = rD + rs1 * rs2

cv.msu

rD, rs1, rs2

rD = rD - rs1 * rs2

16-Bit x 16-Bit Multiplication

Mnemonic

Description

cv.muls

rD, rs1, rs2

rD[31:0] = Sext(rs1[15:0]) * Sext(rs2[15:0])

cv.mulhhs

rD, rs1, rs2

rD[31:0] = Sext(rs1[31:16]) * Sext(rs2[31:16])

cv.mulsN

rD, rs1, rs2, Is3

rD[31:0] = (Sext(rs1[15:0]) * Sext(rs2[15:0])) >>> Is3 Note: Arithmetic shift right

cv.mulhhsN

rD, rs1, rs2, Is3

rD[31:0] = (Sext(rs1[31:16]) * Sext(rs2[31:16])) >>> Is3 Note: Arithmetic shift right

cv.mulsRN

rD, rs1, rs2, Is3

rD[31:0] = (Sext(rs1[15:0]) * Sext(rs2[15:0]) + 2^(Is3-1)) >>> Is3 Note: Arithmetic shift right

cv.mulhhsRN

rD, rs1, rs2, Is3

rD[31:0] = (Sext(rs1[31:16]) * Sext(rs2[31:16]) + 2^(Is3-1)) >>> Is3 Note: Arithmetic shift right

cv.mulu

rD, rs1, rs2

rD[31:0] = Zext(rs1[15:0]) * Zext(rs2[15:0])

cv.mulhhu

rD, rs1, rs2

rD[31:0] = Zext(rs1[31:16]) * Zext(rs2[31:16])

cv.muluN

rD, rs1, rs2, Is3

rD[31:0] = (Zext(rs1[15:0]) * Zext(rs2[15:0])) >> Is3 Note: Logical shift right

cv.mulhhuN

rD, rs1, rs2, Is3

rD[31:0] = (Zext(rs1[31:16]) * Zext(rs2[31:16])) >> Is3 Note: Logical shift right

cv.muluRN

rD, rs1, rs2, Is3

rD[31:0] = (Zext(rs1[15:0]) * Zext(rs2[15:0]) + 2^(Is3-1)) >> Is3 Note: Logical shift right

cv.mulhhuRN

rD, rs1, rs2, Is3

rD[31:0] = (Zext(rs1[31:16]) * Zext(rs2[31:16]) + 2^(Is3-1)) >> Is3 Note: Logical shift right

16-Bit x 16-Bit Multiply-Accumulate

Mnemonic

Description

cv.macsN

rD, rs1, rs2, Is3

rD[31:0] = (Sext(rs1[15:0]) * Sext(rs2[15:0]) + rD) >>> Is3 Note: Arithmetic shift right

cv.machhsN

rD, rs1, rs2, Is3

rD[31:0] = (Sext(rs1[31:16]) * Sext(rs2[31:16]) + rD) >>> Is3 Note: Arithmetic shift right

cv.macsRN

rD, rs1, rs2, Is3

rD[31:0] = (Sext(rs1[15:0]) * Sext(rs2[15:0]) + rD + 2^(Is3-1)) >>> Is3 Note: Arithmetic shift right

cv.machhsRN

, rD, rs1, rs2, Is3

rD[31:0] = (Sext(rs1[31:16]) * Sext(rs2[31:16]) + rD + 2^(Is3-1)) >>> Is3 Note: Arithmetic shift right

cv.macuN

rD, rs1, rs2, Is3

rD[31:0] = (Zext(rs1[15:0]) * Zext(rs2[15:0]) + rD) >> Is3 Note: Logical shift right

cv.machhuN

rD, rs1, rs2, Is3

rD[31:0] = (Zext(rs1[31:16]) * Zext(rs2[31:16]) + rD) >> Is3 Note: Logical shift right

cv.macuRN

rD, rs1, rs2, Is3

rD[31:0] = (Zext(rs1[15:0]) * Zext(rs2[15:0]) + rD + 2^(Is3-1)) >> Is3 Note: Logical shift right

cv.machhuRN

rD, rs1, rs2, Is3

rD[31:0] = (Zext(rs1[31:16]) * Zext(rs2[31:16]) + rD + 2^(Is3-1)) >> Is3 Note: Logical shift right

MAC Encoding

31 : 25

24 :20

19 :15

14 : 12

11 : 7

6 : 0

funct7

rs2

rs1

funct3

rD

opcode

010 0001

src2

src1

000

dest

011 0011

cv.mac rD, rs1, rs2

010 0001

src2

src1

001

dest

011 0011

cv.msu rD, rs1, rs2

31:30

29 : 25

24 :20

19 :15

14 : 12

11 : 7

6 : 0

f2

Is3[4:0]

rs2

rs1

funct3

rD

opcode

10

00000

src2

src1

000

dest

101 1011

cv.muls rD, rs1, rs2

11

00000

src2

src1

000

dest

101 1011

cv.mulhhs rD, rs1, rs2

10

Luimm5[4:0]

src2

src1

000

dest

101 1011

cv.mulsN rD, rs1, rs2, Is3

11

Luimm5[4:0]

src2

src1

000

dest

101 1011

cv.mulhhsN rD, rs1, rs2, Is3

10

Luimm5[4:0]

src2

src1

100

dest

101 1011

cv.mulsRN rD, rs1, rs2, Is3

11

Luimm5[4:0]

src2

src1

100

dest

101 1011

cv.mulhhsRN rD, rs1, rs2, Is3

00

00000

src2

src1

000

dest

101 1011

cv.mulu rD, rs1, rs2

01

00000

src2

src1

000

dest

101 1011

cv.mulhhu rD, rs1, rs2

00

Luimm5[4:0]

src2

src1

000

dest

101 1011

cv.muluN rD, rs1, rs2, Is3

01

Luimm5[4:0]

src2

src1

000

dest

101 1011

cv.mulhhuN rD, rs1, rs2, Is3

00

Luimm5[4:0]

src2

src1

100

dest

101 1011

cv.muluRN rD, rs1, rs2, Is3

01

Luimm5[4:0]

src2

src1

100

dest

101 1011

cv.mulhhuRN rD, rs1, rs2, Is3

10

Luimm5[4:0]

src2

src1

001

dest

101 1011

cv.macsN rD, rs1, rs2, Is3

11

Luimm5[4:0]

src2

src1

001

dest

101 1011

cv.machhsN rD, rs1, rs2, Is3

10

Luimm5[4:0]

src2

src1

101

dest

101 1011

cv.macsRN rD, rs1, rs2, Is3

11

Luimm5[4:0]

src2

src1

101

dest

101 1011

cv.machhsRN rD, rs1, rs2, Is3

00

Luimm5[4:0]

src2

src1

001

dest

101 1011

cv.macuN rD, rs1, rs2, Is3

01

Luimm5[4:0]

src2

src1

001

dest

101 1011

cv.machhuN rD, rs1, rs2, Is3

00

Luimm5[4:0]

src2

src1

101

dest

101 1011

cv.macuRN rD, rs1, rs2, Is3

01

Luimm5[4:0]

src2

src1

101

dest

101 1011

cv.machhuRN rD, rs1, rs2, Is3

SIMD

The SIMD instructions perform operations on multiple sub-word elements at the same time. This is done by segmenting the data path into smaller parts when 8 or 16-bit operations should be performed.

The custom SIMD extensions are only supported if PULP_XPULP == 1.

SIMD is not supported by the compiler tool chain.

SIMD instructions are available in two flavors:

  • 8-Bit, to perform four operations on the 4 bytes inside a 32-bit word at the same time (.b)

  • 16-Bit, to perform two operations on the 2 half-words inside a 32-bit word at the same time (.h)

All the operations are rounded to the specified bidwidth as for the original RISC-V arithmetic operations. This is described by the “and” operation with a MASK. No overflow or carry-out flags are generated as for the 32-bit operations.

Additionally, there are three modes that influence the second operand:

  1. Normal mode, vector-vector operation. Both operands, from rs1 and rs2, are treated as vectors of bytes or half-words.

    e.g. cv.add.h x3,x2,x1 performs:

    x3[31:16] = x2[31:16] + x1[31:16]

    x3[15: 0] = x2[15: 0] + x1[15: 0]

  2. Scalar replication mode (.sc), vector-scalar operation. Operand 1 is treated as a vector, while operand 2 is treated as a scalar and replicated two or four times to form a complete vector. The LSP is used for this purpose.

    e.g. cv.add.sc.h x3,x2,x1 performs:

    x3[31:16] = x2[31:16] + x1[15: 0]

    x3[15: 0] = x2[15: 0] + x1[15: 0]

  3. Immediate scalar replication mode (.sci), vector-scalar operation. Operand 1 is treated as vector, while operand 2 is treated as a scalar and comes from an immediate. The immediate is either sign- or zero-extended, depending on the operation. If not specified, the immediate is sign-extended.

    e.g. cv.add.sci.h x3,x2,0xDA performs:

    x3[31:16] = x2[31:16] + 0xFFDA

    x3[15: 0] = x2[15: 0] + 0xFFDA

In the following table, the index i ranges from 0 to 1 for 16-Bit operations and from 0 to 3 for 8-Bit operations.

  • The index 0 is 15:0 for 16-Bit operations, or 7:0 for 8-Bit operations.

  • The index 1 is 31:16 for 16-Bit operations, or 15:8 for 8-Bit operations.

  • The index 2 is 23:16 for 8-Bit operations.

  • The index 3 is 31:24 for 8-Bit operations.

SIMD ALU Operations

Mnemonic

Description

cv.add[.sc,.sci]{.h,.b}

rD[i] = (rs1[i] + op2[i]) & 0xFFFF

cv.add{.div2,.div4, .div8}

rD[i] = ((rs1[i] + op2[i]) & 0xFFFF)>>{1,2,3}

cv.sub[.sc,.sci]{.h,.b}

rD[i] = (rs1[i] - op2[i]) & 0xFFFF

cv.sub{.div2,.div4, .div8}

rD[i] = ((rs1[i] – op2[i]) & 0xFFFF)>>{1,2,3}

cv.avg[.sc,.sci]{.h,.b}

rD[i] = ((rs1[i] + op2[i]) & {0xFFFF, 0xFF}) >> 1 Note: Arithmetic right shift

cv.avgu[.sc,.sci]{.h,.b}

rD[i] = ((rs1[i] + op2[i]) & {0xFFFF, 0xFF}) >> 1

cv.min[.sc,.sci]{.h,.b}

rD[i] = rs1[i] < op2[i] ? rs1[i] : op2[i]

cv.minu[.sc,.sci]{.h,.b}

rD[i] = rs1[i] < op2[i] ? rs1[i] : op2[i] Note: Immediate is zero-extended, comparison is unsigned

cv.max[.sc,.sci]{.h,.b}

rD[i] = rs1[i] > op2[i] ? rs1[i] : op2[i]

cv.maxu[.sc,.sci]{.h,.b}

rD[i] = rs1[i] > op2[i] ? rs1[i] : op2[i] Note: Immediate is zero-extended, comparison is unsigned

cv.srl[.sc,.sci]{.h,.b}

rD[i] = rs1[i] >> op2[i] Note: Immediate is zero-extended, shift is logical

cv.sra[.sc,.sci]{.h,.b}

rD[i] = rs1[i] >>> op2[i] Note: Immediate is zero-extended, shift is arithmetic

cv.sll[.sc,.sci]{.h,.b}

rD[i] = rs1[i] << op2[i] Note: Immediate is zero-extended, shift is logical

cv.or[.sc,.sci]{.h,.b}

rD[i] = rs1[i] | op2[i]

cv.xor[.sc,.sci]{.h,.b}

rD[i] = rs1[i] ^ op2[i]

cv.and[.sc,.sci]{.h,.b}

rD[i] = rs1[i] & op2[i]

cv.abs{.h,.b}

rD[i] = rs1 < 0 ? –rs1 : rs1

cv.extract.h

rD = Sext(rs1[((I+1)*16)-1 : I*16])

cv.extract.b

rD = Sext(rs1[((I+1)*8)-1 : I*8])

cv.extractu.h

rD = Zext(rs1[((I+1)*16)-1 : I*16])

cv.extractu.b

rD = Zext(rs1[((I+1)*8)-1 : I*8])

cv.insert.h

rD[((I+1)*16-1:I*16] = rs1[15:0] Note: The rest of the bits of rD are untouched and keep their previous value

cv.insert,b

rD[((I+1)*8-1:I*8] = rs1[7:0] Note: The rest of the bits of rD are untouched and keep their previous value

Dot Product Instructions

Mnemonic

Description

cv.dotup[.sc,.sci].h

rD = rs1[0] * op2[0] + rs1[1] * op2[1] Note: All operations are unsigned

cv.dotup[.sc,.sci].b

rD = rs1[0] * op2[0] + rs1[1] * op2[1] + rs1[2] * op2[2] + rs1[3] * op2[3] Note: All operations are unsigned

cv.dotusp[.sc,.sci].h

rD = rs1[0] * op2[0] + rs1[1] * op2[1] Note: rs1 is treated as unsigned, while rs2 is treated as signed

cv.dotusp[.sc,.sci].b

rD = rs1[0] * op2[0] + rs1[1] * op2[1] + rs1[2] * op2[2] + rs1[3] * op2[3] Note: rs1 is treated as unsigned, while rs2 is treated as signed

cv.dotsp[.sc,.sci].h

rD = rs1[0] * op2[0] + rs1[1] * op2[1] Note: All operations are signed

cv.dotsp[.sc,.sci].b

rD = rs1[0] * op2[0] + rs1[1] * op2[1] + rs1[2] * op2[2] + rs1[3] * op2[3] Note: All operations are signed

cv.sdotup[.sc,.sci].h

rD = rD + rs1[0] * op2[0] + rs1[1] * op2[1] Note: All operations are unsigned

cv.sdotup[.sc,.sci].b

rD = rD + rs1[0] * op2[0] + rs1[1] * op2[1] + rs1[2] * op2[2] + rs1[3] * op2[3] Note: All operations are unsigned

cv.sdotusp[.sc,.sci].h

rD = rD + rs1[0] * op2[0] + rs1[1] * op2[1] Note: rs1 is treated as unsigned, while rs2 is treated as signed

cv.sdotusp[.sc,.sci].b

rD = rD + rs1[0] * op2[0] + rs1[1] * op2[1] + rs1[2] * op2[2] + rs1[3] * op2[3] Note: rs1 is treated as unsigned, while rs2 is treated as signed

cv.sdotsp[.sc,.sci].h

rD = rD + rs1[0] * op2[0] + rs1[1] * op2[1] Note: All operations are signed

cv.sdotsp[.sc,.sci].b

rD = rD + rs1[0] * op2[0] + rs1[1] * op2[1] + rs1[2] * op2[2] + rs1[3] * op2[3] Note: All operations are signed

Shuffle and Pack Instructions

Mnemonic

Description

cv.shuffle.h

rD[31:16] = rs1[rs2[16]*16+15:rs2[16]*16] rD[15:0] = rs1[rs2[0]*16+15:rs2[0]*16]

cv.shuffle.sci.h

rD[31:16] = rs1[I1*16+15:I1*16] rD[15:0] = rs1[I0*16+15:I0*16] Note: I1 and I0 represent bits 1 and 0 of the immediate

cv.shuffle.b

rD[31:24] = rs1[rs2[25:24]*8+7:rs2[25:24]*8] rD[23:16] = rs1[rs2[17:16]*8+7:rs2[17:16]*8] rD[15:8] = rs1[rs2[9:8]*8+7:rs2[9:8]*8] rD[7:0] = rs1[rs2[1:0]*8+7:rs2[1:0]*8]

cv.shuffleI0.sci.b

rD[31:24] = rs1[7:0] rD[23:16] = rs1[(I5:I4)*8+7: (I5:I4)*8] rD[15:8] = rs1[(I3:I2)*8+7: (I3:I2)*8] rD[7:0] = rs1[(I1:I0)*8+7:(I1:I0)*8]

cv.shuffleI1.sci.b

rD[31:24] = rs1[15:8] rD[23:16] = rs1[(I5:I4)*8+7: (I5:I4)*8] rD[15:8] = rs1[(I3:I2)*8+7: (I3:I2)*8] rD[7:0] = rs1[(I1:I0)*8+7:(I1:I0)*8]

cv.shuffleI2.sci.b

rD[31:24] = rs1[23:16] rD[23:16] = rs1[(I5:I4)*8+7: (I5:I4)*8] rD[15:8] = rs1[(I3:I2)*8+7: (I3:I2)*8] rD[7:0] = rs1[(I1:I0)*8+7:(I1:I0)*8]

cv.shuffleI3.sci.b

rD[31:24] = rs1[31:24] rD[23:16] = rs1[(I5:I4)*8+7: (I5:I4)*8] rD[15:8] = rs1[(I3:I2)*8+7: (I3:I2)*8] rD[7:0] = rs1[(I1:I0)*8+7:(I1:I0)*8]

cv.shuffle2.h

rD[31:16] = ((rs2[17] == 1) ? rs1 : rD)[rs2[16]*16+15:rs2[16]*16] rD[15:0] = ((rs2[1] == 1) ? rs1 : rD)[rs2[0]*16+15:rs2[0]*16]

cv.shuffle2.b

rD[31:24] = ((rs2[26] == 1) ? rs1 : rD)[rs2[25:24]*8+7:rs2[25:24]*8] rD[23:16] = ((rs2[18] == 1) ? rs1 : rD)[rs2[17:16]*8+7:rs2[17:16]*8] rD[15:8] = ((rs2[10] == 1) ? rs1 : rD)[rs2[9:8]*8+7:rs2[9:8]*8] rD[7:0] = ((rs2[2] == 1) ? rs1 : rD)[rs2[1:0]*8+7:rs2[1:0]*8]

cv.pack

rD[31:16] = rs1[15:0] rD[15:0] = rs2[15:0]

cv.pack.h

rD[31:16] = rs1[31:16] rD[15:0] = rs2[31:16]

cv.packhi.b

rD[31:24] = rs1[7:0] rD[23:16] = rs2[7:0] Note: The rest of the bits of rD are untouched and keep their previous value

cv.packlo.b

rD[15:8] = rs1[7:0] rD[7:0] = rs2[7:0] Note: The rest of the bits of rD are untouched and keep their previous value

SIMD ALU Encoding

31 : 27

26

25

24 : 20

19 : 15

14 :12

11 : 7

6 : 0

funct5

F

rs2

rs1

funct3

rD

opcode

0 0000

0

0

src2

src1

000

dest

101 0111

cv.add.h rD, rs1, rs2

0 0000

0

0

src2

src1

100

dest

101 0111

cv.add.sc.h rD, rs1, rs2

0 0000

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.add.sci.h rD, rs1, Imm6

0 0000

0

0

src2

src1

001

dest

101 0111

cv.add.b rD, rs1, rs2

0 0000

0

0

src2

src1

101

dest

101 0111

cv.add.sc.b rD, rs1, rs2

0 0000

0

Imm6[5:0]

src1

111

dest

101 0111

cv.add.sci.b rD, rs1, Imm6

0 1011

1

X

src2

src1

010

dest

101 0111

cv.add.div2 rD, rs1, rs2

0 1011

1

X

src2

src1

100

dest

101 0111

cv.add.div4 rD, rs1, rs2

0 1011

1

x

src2

src1

110

dest

101 0111

cv.add.div8 rD, rs1, rs2

0 0001

0

0

src2

src1

000

dest

101 0111

cv.sub.h rD, rs1, rs2

0 0001

0

0

src2

src1

100

dest

101 0111

cv.sub.sc.h rD, rs1, rs2

0 0001

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.sub.sci.h rD, rs1, Imm6

0 0001

0

0

src2

src1

001

dest

101 0111

cv.sub.b rD, rs1, rs2

0 0001

0

0

src2

src1

101

dest

101 0111

cv.sub.sc.b rD, rs1, rs2

0 0001

0

Imm6[5:0]

src1

111

dest

101 0111

cv.sub.sci.b rD, rs1, Imm6

0 1100

1

x

src2

src1

010

dest

101 0111

cv.sub.div2 rD, rs1, rs2

0 1100

1

x

src2

src1

100

dest

101 0111

cv.sub.div4 rD, rs1, rs2

0 1100

1

x

src2

src1

110

dest

101 0111

cv.sub.div8 rD, rs1, rs2

0 0010

0

0

src2

src1

000

dest

101 0111

cv.avg.h rD, rs1, rs2

0 0010

0

0

src2

src1

100

dest

101 0111

cv.avg.sc.h rD, rs1, rs2

0 0010

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.avg.sci.h rD, rs1, Imm6

0 0010

0

0

src2

src1

001

dest

101 0111

cv.avg.b rD, rs1, rs2

0 0010

0

0

src2

src1

101

dest

101 0111

cv.avg.sc.b rD, rs1, rs2

0 0010

0

Imm6[5:0]

src1

111

dest

101 0111

cv.avg.sci.b rD, rs1, Imm6

0 0011

0

0

src2

src1

000

dest

101 0111

cv.avgu.h rD, rs1, rs2

0 0011

0

0

src2

src1

100

dest

101 0111

cv.avgu.sc.h rD, rs1, rs2

0 0011

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.avgu.sci.h rD, rs1, Imm6

0 0011

0

0

src2

src1

001

dest

101 0111

cv.avgu.b rD, rs1, rs2

0 0011

0

0

src2

src1

101

dest

101 0111

cv.avgu.sc.b rD, rs1, rs2

0 0011

0

Imm6[5:0]

src1

111

dest

101 0111

cv.avgu.sci.b rD, rs1, Imm6

0 0100

0

0

src2

src1

000

dest

101 0111

cv.min.h rD, rs1, rs2

0 0100

0

0

src2

src1

100

dest

101 0111

cv.min.sc.h rD, rs1, rs2

0 0100

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.min.sci.h rD, rs1, Imm6

0 0100

0

0

src2

src1

001

dest

101 0111

cv.min.b rD, rs1, rs2

0 0100

0

0

src2

src1

101

dest

101 0111

cv.min.sc.b rD, rs1, rs2

0 0100

0

Imm6[5:0]

src1

111

dest

101 0111

cv.min.sci.b rD, rs1, Imm6

0 0101

0

0

src2

src1

000

dest

101 0111

cv.minu.h rD, rs1, rs2

0 0101

0

0

src2

src1

100

dest

101 0111

cv.minu.sc.h rD, rs1, rs2

0 0101

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.minu.sci.h rD, rs1, Imm6

0 0101

0

0

src2

src1

001

dest

101 0111

cv.minu.b rD, rs1, rs2

0 0101

0

0

src2

src1

101

dest

101 0111

cv.minu.sc.b rD, rs1, rs2

0 0101

0

Imm6[5:0]

src1

111

dest

101 0111

cv.minu.sci.b rD, rs1, Imm6

0 0110

0

0

src2

src1

000

dest

101 0111

cv.max.h rD, rs1, rs2

0 0110

0

0

src2

src1

100

dest

101 0111

cv.max.sc.h rD, rs1, rs2

0 0110

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.max.sci.h rD, rs1, Imm6

0 0110

0

0

src2

src1

001

dest

101 0111

cv.max.b rD, rs1, rs2

0 0110

0

0

src2

src1

101

dest

101 0111

cv.max.sc.b rD, rs1, rs2

0 0110

0

Imm6[5:0]

src1

111

dest

101 0111

cv.max.sci.b rD, rs1, Imm6

0 0111

0

0

src2

src1

000

dest

101 0111

cv.maxu.h rD, rs1, rs2

0 0111

0

0

src2

src1

100

dest

101 0111

cv.maxu.sc.h rD, rs1, rs2

0 0111

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.maxu.sci.h rD, rs1, Imm6

0 0111

0

0

src2

src1

001

dest

101 0111

cv.maxu.b rD, rs1, rs2

0 0111

0

0

src2

src1

101

dest

101 0111

cv.maxu.sc.b rD, rs1, rs2

0 0111

0

Imm6[5:0]

src1

111

dest

101 0111

cv.maxu.sci.b rD, rs1, Imm6

0 1000

0

0

src2

src1

000

dest

101 0111

cv.srl.h rD, rs1, rs2

0 1000

0

0

src2

src1

100

dest

101 0111

cv.srl.sc.h rD, rs1, rs2

0 1000

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.srl.sci.h rD, rs1, Imm6

0 1000

0

0

src2

src1

001

dest

101 0111

cv.srl.b rD, rs1, rs2

0 1000

0

0

src2

src1

101

dest

101 0111

cv.srl.sc.b rD, rs1, rs2

0 1000

0

Imm6[5:0]

src1

111

dest

101 0111

cv.srl.sci.b rD, rs1, Imm6

0 1001

0

0

src2

src1

000

dest

101 0111

cv.sra.h rD, rs1, rs2

0 1001

0

0

src2

src1

100

dest

101 0111

cv.sra.sc.h rD, rs1, rs2

0 1001

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.sra.sci.h rD, rs1, Imm6

0 1001

0

0

src2

src1

001

dest

101 0111

cv.sra.b rD, rs1, rs2

0 1001

0

0

src2

src1

101

dest

101 0111

cv.sra.sc.b rD, rs1, rs2

0 1001

0

Imm6[5:0]

src1

111

dest

101 0111

cv.sra.sci.b rD, rs1, Imm6

0 1010

0

0

src2

src1

000

dest

101 0111

cv.sll.h rD, rs1, rs2

0 1010

0

0

src2

src1

100

dest

101 0111

cv.sll.sc.h rD, rs1, rs2

0 1010

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.sll.sci.h rD, rs1, Imm6

0 1010

0

0

src2

src1

001

dest

101 0111

cv.sll.b rD, rs1, rs2

0 1010

0

0

src2

src1

101

dest

101 0111

cv.sll.sc.b rD, rs1, rs2

0 1010

0

Imm6[5:0]

src1

111

dest

101 0111

cv.sll.sci.b rD, rs1, Imm6

0 1011

0

0

src2

src1

000

dest

101 0111

cv.or.h rD, rs1, rs2

0 1011

0

0

src2

src1

100

dest

101 0111

cv.or.sc.h rD, rs1, rs2

0 1011

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.or.sci.h rD, rs1, Imm6

0 1011

0

0

src2

src1

001

dest

101 0111

cv.or.b rD, rs1, rs2

0 1011

0

0

src2

src1

101

dest

101 0111

cv.or.sc.b rD, rs1, rs2

0 1011

0

Imm6[5:0]

src1

111

dest

101 0111

cv.or.sci.b rD, rs1, Imm6

0 1100

0

0

src2

src1

000

dest

101 0111

cv.xor.h rD, rs1, rs2

0 1100

0

0

src2

src1

100

dest

101 0111

cv.xor.sc.h rD, rs1, rs2

0 1100

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.xor.sci.h rD, rs1, Imm6

0 1100

0

0

src2

src1

001

dest

101 0111

cv.xor.b rD, rs1, rs2

0 1100

0

0

src2

src1

101

dest

101 0111

cv.xor.sc.b rD, rs1, rs2

0 1100

0

Imm6[5:0]

src1

111

dest

101 0111

cv.xor.sci.b rD, rs1, Imm6

0 1101

0

0

src2

src1

000

dest

101 0111

cv.and.h rD, rs1, rs2

0 1101

0

0

src2

src1

100

dest

101 0111

cv.and.sc.h rD, rs1, rs2

0 1101

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.and.sci.h rD, rs1, Imm6

0 1101

0

0

src2

src1

001

dest

101 0111

cv.and.b rD, rs1, rs2

0 1101

0

0

src2

src1

101

dest

101 0111

cv.and.sc.b rD, rs1, rs2

0 1101

0

Imm6[5:0]

src1

111

dest

101 0111

cv.and.sci.b rD, rs1, Imm6

0 1110

0

0

0

src1

000

dest

101 0111

cv.abs.h rD, rs1

0 1110

0

0

0

src1

001

dest

101 0111

cv.abs.b rD, rs1

0 1011

1

x

0

src1

000

dest

101 0111

cv.cplxconj rD, rs1

0 1111

0

Imm6[5:0]

src1

110

dest

101 0111

cv.extract.h rD, rs1, Imm6

0 1111

0

Imm6[5:0]

src1

111

dest

101 0111

cv.extract.b rD, rs1, Imm6

1 0010

0

Imm6[5:0]

src1

110

dest

101 0111

cv.extractu.h rD, rs1, Imm6

1 0010

0

Imm6[5:0]

src1

111

dest

101 0111

cv.extractu.b rD, rs1, Imm6

1 0110

0

Imm6[5:0]

src1

110

dest

101 0111

cv.insert.h rD, rs1, Imm6

1 0110

0

Imm6[5:0]

src1

111

dest

101 0111

cv.insert.b rD, rs1, Imm6

1 0000

0

0

src2

src1

000

dest

101 0111

cv.dotup.h rD, rs1, rs2

1 0000

0

0

src2

src1

100

dest

101 0111

cv.dotup.sc.h rD, rs1, rs2

1 0000

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.dotup.sci.h rD, rs1, Imm6

1 0000

0

0

src2

src1

001

dest

101 0111

cv.dotup.b rD, rs1, rs2

1 0000

0

0

src2

src1

101

dest

101 0111

cv.dotup.sc.b rD, rs1, rs2

1 0000

0

Imm6[5:0]

src1

111

dest

101 0111

cv.dotup.sci.b rD, rs1, Imm6

1 0001

0

0

src2

src1

000

dest

101 0111

cv.dotusp.h rD, rs1, rs2

1 0001

0

0

src2

src1

100

dest

101 0111

cv.dotusp.sc.h rD, rs1, rs2

1 0001

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.dotusp.sci.h rD, rs1, Imm6

1 0001

0

0

src2

src1

001

dest

101 0111

cv.dotusp.b rD, rs1, rs2

1 0001

0

0

src2

src1

101

dest

101 0111

cv.dotusp.sc.b rD, rs1, rs2

1 0001

0

Imm6[5:0]

src1

111

dest

101 0111

cv.dotusp.sci.b rD, rs1, Imm6

1 0011

0

0

src2

src1

000

dest

101 0111

cv.dotsp.h rD, rs1, rs2

1 0011

0

0

src2

src1

100

dest

101 0111

cv.dotsp.sc.h rD, rs1, rs2

1 0011

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.dotsp.sci.h rD, rs1, Imm6

1 0011

0

0

src2

src1

001

dest

101 0111

cv.dotsp.b rD, rs1, rs2

1 0011

0

0

src2

src1

101

dest

101 0111

cv.dotsp.sc.b rD, rs1, rs2

1 0011

0

Imm6[5:0]

src1

111

dest

101 0111

cv.dotsp.sci.b rD, rs1, Imm6

1 0100

0

0

src2

src1

000

dest

101 0111

cv.sdotup.h rD, rs1, rs2

1 0100

0

0

src2

src1

100

dest

101 0111

cv.sdotup.sc.h rD, rs1, rs2

1 0100

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.sdotup.sci.h rD, rs1, Imm6

1 0100

0

0

src2

src1

001

dest

101 0111

cv.sdotup.b rD, rs1, rs2

1 0100

0

0

src2

src1

101

dest

101 0111

cv.sdotup.sc.b rD, rs1, rs2

1 0100

0

Imm6[5:0]

src1

111

dest

101 0111

cv.sdotup.sci.b rD, rs1, Imm6

1 0101

0

0

src2

src1

000

dest

101 0111

cv.sdotusp.h rD, rs1, rs2

1 0101

0

0

src2

src1

100

dest

101 0111

cv.sdotusp.sc.h rD, rs1, rs2

1 0101

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.sdotusp.sci.h rD, rs1, Imm6

1 0101

0

0

src2

src1

001

dest

101 0111

cv.sdotusp.b rD, rs1, rs2

1 0101

0

0

src2

src1

101

dest

101 0111

cv.sdotusp.sc.b rD, rs1, rs2

1 0101

0

Imm6[5:0]

src1

111

dest

101 0111

cv.sdotusp.sci.b rD, rs1, Imm6

1 0111

0

0

src2

src1

000

dest

101 0111

cv.sdotsp.h rD, rs1, rs2

1 0111

0

0

src2

src1

100

dest

101 0111

cv.sdotsp.sc.h rD, rs1, rs2

1 0111

0

Imm6[5:0]s

src1

110

dest

101 0111

cv.sdotsp.sci.h rD, rs1, Imm6

1 0111

0

0

src2

src1

001

dest

101 0111

cv.sdotsp.b rD, rs1, rs2

1 0111

0

0

src2

src1

101

dest

101 0111

cv.sdotsp.sc.b rD, rs1, rs2

1 0111

0

Imm6[5:0]

src1

111

dest

101 0111

cv.sdotsp.sci.b rD, rs1, Imm6

1 1000

0

0

src2

src1

000

dest

101 0111

cv.shuffle.h rD, rs1, rs2

1 1000

0

Imm6[5:0]

src1

110

dest

101 0111

cv.shuffle.sci.h rD, rs1, Imm6

1 1000

0

0

src2

src1

001

dest

101 0111

cv.shuffle.b rD, rs1, rs2

1 1000

0

Imm6[5:0]

src1

111

dest

101 0111

cv.shuffleI0.sci.b rD, rs1, Imm6

1 1101

0

Imm6[5:0]

src1

111

dest

101 0111

cv.shuffleI1.sci.b rD, rs1, Imm6

1 1110

0

Imm6[5:0]

src1

111

dest

101 0111

cv.shuffleI2.sci.b rD, rs1, Imm6

1 1111

0

Imm6[5:0]

src1

111

dest

101 0111

cv.shuffleI3.sci.b rD, rs1, Imm6

1 1001

0

0

src2

src1

000

dest

101 0111

cv.shuffle2.h rD, rs1, rs2

1 1001

0

0

src2

src1

001

dest

101 0111

cv.shuffle2.b rD, rs1, rs2

1 1010

0

0

src2

src1

000

dest

101 0111

cv.pack rD, rs1, rs2

1 1010

0

1

src2

src1

000

dest

101 0111

cv.pack.h rD, rs1, rs2

1 1011

0

0

src2

src1

001

dest

101 0111

cv.packhi.b rD, rs1, rs2

1 1100

0

0 | src2

src1

001

dest

101 0111

cv.packlo.b rD, rs1, rs2

Note: Imm6[5:0] is encoded as { Imm6[0], Imm6[5:1] }, LSB at the 25th bit of the instruction

SIMD Comparison Operations

SIMD comparisons are done on individual bytes (.b) or half-words (.h), depending on the chosen mode. If the comparison result is true, all bits in the corresponding byte/half-word are set to 1. If the comparison result is false, all bits are set to 0.

The default mode (no .sc, .sci) compares the lowest byte/half-word of the first operand with the lowest byte/half-word of the second operand, and so on. If the mode is set to scalar replication (.sc), always the lowest byte/half-word of the second operand is used for comparisons, thus instead of a vector comparison a scalar comparison is performed. In the immediate scalar replication mode (.sci), the immediate given to the instruction is used for the comparison.

Mnemonic

Description

cv.cmpeq[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] == op2 ? ‘1 : ‘0

cv.cmpne[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] != op2 ? ‘1 : ‘0

cv.cmpgt[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] > op2 ? ‘1 : ‘0

cv.cmpge[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] >=op2 ? ‘1 : ‘0

cv.cmplt[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] < op2 ? ‘1 : ‘0

cv.cmple[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] <= op2 ? ‘1 : ‘0

cv.cmpgtu[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] > op2 ? ‘1 : ‘0 Note: Unsigned comparison

cv.cmpgeu[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] >= op2 ? ‘1 : ‘0 Note: Unsigned comparison

cv.cmpltu[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] < op2 ? ‘1 : ‘0 Note: Unsigned comparison

cv.cmpleu[.sc,.sci]{.h,.b}

rD, rs1, {rs2, Imm6}

rD[i] = rs1[i] <= op2 ? ‘1 : ‘0 Note: Unsigned comparison

SIMD Comparison Encoding

31 : 27

26

25

24 : 20

19 : 15

14 : 12

11 : 7

6 : 0

funct5

F

rs2

rs1

funct3

rD

opcode

0 0000

1

0

src2

src1

000

dest

101 0111

cv.cmpeq.h rD, rs1, rs2

0 0000

1

0

src2

src1

100

dest

101 0111

cv.cmpeq.sc.h rD, rs1, rs2

0 0000

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmpeq.sci.h rD, rs1, Imm6

0 0000

1

0

src2

src1

001

dest

101 0111

cv.cmpeq.b rD, rs1, rs2

0 0000

1

0

src2

src1

101

dest

101 0111

cv.cmpeq.sc.b rD, rs1, rs2

0 0000

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmpeq.sci.b rD, rs1, Imm6

0 0001

1

0

src2

src1

000

dest

101 0111

cv.cmpne.h rD, rs1, rs2

0 0001

1

0

src2

src1

100

dest

101 0111

cv.cmpne.sc.h rD, rs1, rs2

0 0001

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmpne.sci.h rD, rs1, Imm6

0 0001

1

0

src2

src1

001

dest

101 0111

cv.cmpne.b rD, rs1, rs2

0 0001

1

0

src2

src1

101

dest

101 0111

cv.cmpne.sc.b rD, rs1, rs2

0 0001

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmpne.sci.b rD, rs1, Imm6

0 0010

1

0

src2

src1

000

dest

101 0111

cv.cmpgt.h rD, rs1, rs2

0 0010

1

0

src2

src1

100

dest

101 0111

cv.cmpgt.sc.h rD, rs1, rs2

0 0010

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmpgt.sci.h rD, rs1, Imm6

0 0010

1

0

src2

src1

001

dest

101 0111

cv.cmpgt.b rD, rs1, rs2

0 0010

1

0

src2

src1

101

dest

101 0111

cv.cmpgt.sc.b rD, rs1, rs2

0 0010

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmpgt.sci.b rD, rs1, Imm6

0 0011

1

0

src2

src1

000

dest

101 0111

cv.cmpge.h rD, rs1, rs2

0 0011

1

0

src2

src1

100

dest

101 0111

cv.cmpge.sc.h rD, rs1, rs2

0 0011

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmpge.sci.h rD, rs1, Imm6

0 0011

1

0

src2

src1

001

dest

101 0111

cv.cmpge.b rD, rs1, rs2

0 0011

1

0

src2

src1

101

dest

101 0111

cv.cmpge.sc.b rD, rs1, rs2

0 0011

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmpge.sci.b rD, rs1, Imm6

0 0100

1

0

src2

src1

000

dest

101 0111

cv.cmplt.h rD, rs1, rs2

0 0100

1

0

src2

src1

100

dest

101 0111

cv.cmplt.sc.h rD, rs1, rs2

0 0100

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmplt.sci.h rD, rs1, Imm6

0 0100

1

0

src2

src1

001

dest

101 0111

cv.cmplt.b rD, rs1, rs2

0 0100

1

0

src2

src1

101

dest

101 0111

cv.cmplt.sc.b rD, rs1, rs2

0 0100

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmplt.sci.b rD, rs1, Imm6

0 0101

1

0

src2

src1

000

dest

101 0111

cv.cmple.h rD, rs1, rs2

0 0101

1

0

src2

src1

100

dest

101 0111

cv.cmple.sc.h rD, rs1, rs2

0 0101

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmple.sci.h rD, rs1, Imm6

0 0101

1

0

src2

src1

001

dest

101 0111

cv.cmple.b rD, rs1, rs2

0 0101

1

0

src2

src1

101

dest

101 0111

cv.cmple.sc.b rD, rs1, rs2

0 0101

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmple.sci.b rD, rs1, Imm6

0 0110

1

0

src2

src1

000

dest

101 0111

cv.cmpgtu.h rD, rs1, rs2

0 0110

1

0

src2

src1

100

dest

101 0111

cv.cmpgtu.sc.h rD, rs1, rs2

0 0110

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmpgtu.sci.h rD, rs1, Imm6

0 0110

1

0

src2

src1

001

dest

101 0111

cv.cmpgtu.b rD, rs1, rs2

0 0110

1

0

src2

src1

101

dest

101 0111

cv.cmpgtu.sc.b rD, rs1, rs2

0 0110

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmpgtu.sci.b rD, rs1, Imm6

0 0111

1

0

src2

src1

000

dest

101 0111

cv.cmpgeu.h rD, rs1, rs2

0 0111

1

0

src2

src1

100

dest

101 0111

cv.cmpgeu.sc.h rD, rs1, rs2

0 0111

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmpgeu.sci.h rD, rs1, Imm6

0 0111

1

0

src2

src1

001

dest

101 0111

cv.cmpgeu.b rD, rs1, rs2

0 0111

1

0

src2

src1

101

dest

101 0111

cv.cmpgeu.sc.b rD, rs1, rs2

0 0111

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmpgeu.sci.b rD, rs1, Imm6

0 1000

1

0

src2

src1

000

dest

101 0111

cv.cmpltu.h rD, rs1, rs2

0 1000

1

0

src2

src1

100

dest

101 0111

cv.cmpltu.sc.h rD, rs1, rs2

0 1000

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmpltu.sci.h rD, rs1, Imm6

0 1000

1

0

src2

src1

001

dest

101 0111

cv.cmpltu.b rD, rs1, rs2

0 1000

1

0

src2

src1

101

dest

101 0111

cv.cmpltu.sc.b rD, rs1, rs2

0 1000

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmpltu.sci.b rD, rs1, Imm6

0 1001

1

0

src2

src1

000

dest

101 0111

cv.cmpleu.h rD, rs1, rs2

0 1001

1

0

src2

src1

100

dest

101 0111

cv.cmpleu.sc.h rD, rs1, rs2

0 1001

1

Imm6[5:0]

src1

110

dest

101 0111

cv.cmpleu.sci.h rD, rs1, Imm6

0 1001

1

0

src2

src1

001

dest

101 0111

cv.cmpleu.b rD, rs1, rs2

0 1001

1

0

src2

src1

101

dest

101 0111

cv.cmpleu.sc.b rD, rs1, rs2

0 1001

1

Imm6[5:0]

src1

111

dest

101 0111

cv.cmpleu.sci.b rD, rs1, Imm6

Note: Imm6[5:0] is encoded as { Imm6[0], Imm6[5:1] }, LSB at the 25th bit of the instruction

SIMD Complex-number Operations

SIMD Complex-number operations are extra instructions that uses the packed-SIMD extentions to represent Complex-numbers. These extentions use only the half-words mode and only operand in registers. A number C = {Re, Im} is represented as a vector of two 16-Bits signed numbers. C[0] is the real part [15:0], C[1] is the imaginary part [31:16]. Such operations are subtraction of 2 complexes with post rotation by -j, the complex and conjugate, and Complex multiplications. The complex multiplications are performed in two separate instructions, one to compute the real part, and one to compute the imaginary part.

As for all the other SIMD instructions, no flags are raised and CSR register are unmodified. No carry, overflow is generated. Instructions are rounded up as the mask & 0xFFFF explicits.

Mnemonic

Description

cv.subrotmj{/,div2,div4,div8}

rD[0] = ((rs1[1] – rs2[1]) & 0xFFFF)>>{0,1,2,3}

rD[1] = ((rs2[0] – rs1[0]) & 0xFFFF)>>{0,1,2,3}

cv.cplxconj

rD[0] = rs1[0]

rD[1] = -rs1[1]

cv.cplxmul.r.{/,div2,div4,div8}

rD[15:0 ] = (rs1[0]*rs2[0] – rs1[1]*rs2[1])>>{15,16,17,18}

rD[31:16] = rD[31:16]

cv.cplxmul.i.{/,div2,div4,div8}

rD[31:16] = (rs1[0]*rs2[1] + rs1[1]*rs2[0])>>{15,16,17,18}

rD[15:0 ] = rD[15:0 ]

SIMD Complex-numbers Encoding

31 : 27

26

25

24 : 20

19 : 15

14 :12

11 : 7

6 : 0

funct5

F

rs2

rs1

funct3

rD

opcode

0 1101

1

x

src2

src1

000

dest

101 0111

cv.subrotmj rD, rs1, rs2

0 1101

1

x

src2

src1

010

dest

101 0111

cv.subrotmj.div2 rD, rs1, rs2

0 1101

1

x

src2

src1

100

dest

101 0111

cv.subrotmj.div4 rD, rs1, rs2

0 1101

1

x

src2

src1

110

dest

101 0111

cv.subrotmj.div8 rD, rs1, rs2

0 1011

1

x

xxxxx

src1

000

dest

101 0111

cv.cplxconj rD, rs1

0 1010

1

0

src2

src1

000

dest

101 0111

cv.cplxmul.r rD, rs1, rs2

0 1010

1

0

src2

src1

01x

dest

101 0111

cv.cplxmul.r.div2 rD, rs1, rs2

0 1010

1

0

src2

src1

100

dest

101 0111

cv.cplxmul.r.div4 rD, rs1, rs2

0 1010

1

0

src2

src1

110

dest

101 0111

cv.cplxmul.r.div8 rD, rs1, rs2

0 1010

1

1

src2

src1

000

dest

101 0111

cv.cplxmul.i rD, rs1, rs2

0 1010

1

1

src2

src1

010

dest

101 0111

cv.cplxmul.i.div2 rD, rs1, rs2

0 1010

1

1

src2

src1

100

dest

101 0111

cv.cplxmul.i.div4 rD, rs1, rs2

0 1010

1

1

src2

src1

110

dest

101 0111

cv.cplxmul.i.div8 rD, rs1, rs2