CV32E40X has 31 32-bit wide registers which form registers
x0 is statically bound to 0 and can only be read, it does not
contain any sequential logic.
The number of read ports and the number of write ports of the register file depends on the parameter settings of CV32E40X.
The register file has two read ports and one write port for the default parameter settings. If
X_EXT = 1, then depending on the other
eXtension interface parameters up to three read ports and two write ports can be instantiated. Register file reads are performed in the ID stage.
Register file writes are performed in the WB stage.
General Purpose Register File
The general purpose register file is flip-flop-based. It uses regular, positive-edge-triggered flip-flops to implement the registers.